Referanser

Alemi, Farrokh, Walter Rom, and Eric Eisenstein. 1996. “Risk-Adjusted Control Charts for Health Care Assessment.” Annals of Operations Research 67(1):45–60. doi: 10.1007/BF02187023.

Alemi, Farrokh, and Thomas Sullivan. 2001. “Tutorial on Risk Adjusted X-Bar Charts: Applications to Measurement of Diabetes Control.” Quality Management in Healthcare 9(3).

Allaire, J., Yihui Xie, J. McPherson, J. Luraschi, K. Ushey, A. Atkins, Hadley Wickham, J. Cheng, W. Chang, and R. Iannone. 2021. “Rmarkdown: Dynamic Documents for r.”

Alwan, Layth C. 1991. “Time-Series Effects and Degradation of Control Chart Performance Resulting from Overadjustment.” Total Quality Management 2(1):99–112. doi: 10.1080/09544129100000009.

Anderson, T. W., and D. A. Darling. 1952. “Asymptotic Theory of Certain" Goodness of Fit" Criteria Based on Stochastic Processes.” 23(2):193–212.

Anderson, T. W., and D. A. Darling. 1954. “A Test of Goodness of Fit.” Journal of the American Statistical Association 49(268):765. doi: 10.2307/2281537.

Anhøj, Jacob. 2009. “Statistisk Processtyring i Sundhedsvæsenet.” Ugeskr Læger 171(21):1764–68.

Anhøj, Jacob. 2015. “Diagnostic Value of Run Chart Analysis: Using Likelihood Ratios to Compare Run Chart Rules on Simulated Data Series” edited by R. K. Hills. PLOS ONE 10(3):e0121349. doi: 10.1371/journal.pone.0121349.

Anhøj, Jacob. 2020. “Qicharts2: Quality Improvement Charts. An Implementation of Statistical Process Control Charts for R.”

Anhøj, Jacob. 2021a. “Control Charts with Qicharts for R.”

Anhøj, Jacob. 2021b. “Quality Improvement Charts. An Implementation of Statistical Process Control Charts for R.”

Anhøj, Jacob, and Brian Bjørn. 2009. “Statistisk Processtyring i Sundhedsvæsenet.” Ugeskr Læger 171(21):1764–68.

Anhøj, Jacob, and Anne Vingaard Olesen. 2014. “Run Charts Revisited: A Simulation Study of Run Chart Rules for Detection of Non-Random Variation in Health Care Processes” edited by R. K. Hills. PLoS ONE 9(11):e113825. doi: 10.1371/journal.pone.0113825.

Anhøj, Jacob, and Tore Wentzel-Larsen. 2020. “Smooth Operator: Modifying the Anhøj Rules to Improve Runs Analysis in Statistical Process Control” edited by M. A. Fernández. PLOS ONE 15(6):e0233920. doi: 10.1371/journal.pone.0233920.

Antony, Jiju, Alejandro Balbontin, and Tolga Taner. 2000. “Key Ingredients for the Effective Implementation of Statistical Process Control.” Work Study 49(6):242–47. doi: 10.1108/00438020010343417.

Appelbaum, Steven H. 1997. “Socio-Technical Systems Theory: An Intervention Strategy for Organizational Development.” Management Decision 35(6):452–63. doi: 10.1108/00251749710173823.

Auguie, Baptiste. 2017. “gridExtra: Miscellaneous Functions for "Grid" Graphics.”

Bache, Stefan Milton, and Hadley Wickham. 2020. “Magrittr: A Forward-Pipe Operator for r.”

Balestracci, Davis. 2014. “Control Charts: Simple Elegance or Legalized Torture?”

Barthelme, Simon. 2021. “Imager: Image Processing Library Based on ’CImg’.”

Benneyan, J. C., R. C. Lloyd, and P. E. Plsek. 2003. “Statistical Process Control as a Tool for Research and Healthcare Improvement.” BMJ Quality & Safety 12(6):458–64. doi: 10.1136/qhc.12.6.458.

Benneyan, James C. 1998a. “Statistical Quality Control Methods in Infection Control and Hospital Epidemiology, Part I: Introduction and Basic Theory.” Infection Control and Hospital Epidemiology 19(3):194–214. doi: 10.2307/30143442.

Benneyan, James C. 1998b. “Statistical Quality Control Methods in Infection Control and Hospital Epidemiology, Part II: Chart Use, Statistical Properties, and Research Issues.” Infection Control & Hospital Epidemiology 19(4):265–83. doi: DOI: 10.1017/S0195941700087397.

Benneyan, James C. 2001. “Number-Between g-Type Statistical Quality Control Charts for Monitoring Adverse Events.” Health Care Management Science 4:305–18. doi: 10.1023/a:1011846412909.

Berardinelli, Carl, and Lew Yerian. n.d. “Run Charts: A Simple and Powerful Tool for Process Improvement.” ISIXSIGMA.

Brudvik, Marie. 2009. “Valg Av Passende SPC-diagram.” Helsebiblioteket.no.

Burns, Tom, and George Stalker. 1961. The Management of Innovation. London: Tavistock Publications.

Cano, Eimili L., Javier M. Moguerza, and Andres Redchuk. 2012. “Six Sigma with R.”

Carey, Raymond G. 2002. “How Do You Know That Your Care Is Improving? Part I: Basic Concepts in Statistical Thinking.” The Journal of Ambulatory Care Management 25(1).

Carey, Raymond G. 2003. Improving Healthcare with Control Charts. Basic and Advanced SPC Methods and Case Studies. Milwaukee: ASQ Quality Press.

Chan, Lai K., Smiley W. Cheng, and Frederick A. Spiring. 1988. “A New Measure of Process Capability: C _pm .” Journal of Quality Technology 20(3):162–75. doi: 10.1080/00224065.1988.11979102.

Chin, Marshall H., and Naoko Muramatsu. 2003. “What Is the Quality of Quality of Medical Care Measures?: Rashomon -Like Relativism and Real-World Applications.” Perspectives in Biology and Medicine 46(1):5–20. doi: 10.1353/pbm.2003.0002.

Crostic, Michael. 2015. “The Funnel Experiment.” YouTube.

D’Agostino, R. B., and M. A. Stephens, eds. 1986. Goodness-of Fit Techniques. Marcel Dekker.

Deleryd, Mats. 1999. “A Pragmatic View on Process Capability Studies.” International Journal of Production Economics 58(3):319–30. doi: 10.1016/S0925-5273(98)00214-X.

Deming, W. E. 1986. Out of the Crisis. Cambridge, MA: Institute of Technology Center for Advanced Engineering Study.

Elwyn, Glyn, Stephen Buetow, Judith Hibbard, and Michel Wensing. 2007. “Respecting the Subjective: Quality Measurement from the Patient’s Perspective.” BMJ 335(7628):1021–22. doi: 10.1136/bmj.39339.490301.AD.

English, J. R., and G. D. Taylor. 1993. “Process Capability Analysis – a Robustness Stud.” International Journal of Production Research 31(7):1621–35.

Fasting, Sigurd, and Sven E. Gisvold. 2003. “Statistical Process Control Methods Allow the Analysis and Improvement of Anesthesia Care.” Canadian Journal of Anesthesia/Journal Canadien d’anesthésie 50(8):767–74. doi: 10.1007/BF03019371.

Fedit, Ben. 2018. “Central Limit Theorem -Example Using R.” Ben’s Blog.

Field, Andy. 2009. Discovering Statistics Using SPSS. Third. London: SAGE Publications Ltd.

Field, Andy, Jeremy Miles, and Zoë Field. 2012. Discovering Statistics Using r. SAGE Publications.

Gavrilov, Ilya, and Ruslan Pusev. 2014. “Normtest: Tests for Normality.”

Georgantzas, Nicholas C., and Joyce N. Orsini. 2003. “Tampering Dynamics.” in Proceedings of the 21st International System Dynamics Society Conference. New York.

Gohel, David. 2021a. “Flextable: Functions for Tabular Reporting.”

Gohel, David. 2021b. “Officer: Manipulation of Microsoft Word and PowerPoint Documents.”

Good, I. J. 1973. “What Are Degrees of Freedom?” The American Statistician 27(5):227–28. doi: 10.1080/00031305.1973.10479042.

Gross, Juergen, and Uwe Ligges. 2015. “Nortest: Tests for Normality.”

Guthrie, William F. 2020. “NIST/SEMATECH e-Handbook of Statistical Methods (NIST Handbook 151).”

Hartmann, K., J. Krois, and B. Waske. 2018a. “Critical Value and the p-Value.” E-Learning Project SOGA: Statistics and Geospatial Data Analysis. Department of Earth Sciences, Freie Universitaet Berlin.

Hartmann, K., J. Krois, and B. Waske. 2018b. “Variance and Standard Deviation.” E-Learning Project SOGA: Statistics and Geospatial Data Analysis. Department of Earth Sciences, Freie Universitaet Berlin.

Horikoshi, Masaaki, and Yuan Tang. 2016. “Ggfortify: Data Visualization Tools for Statistical Analysis Results.”

Jäntschi, Lorentz, and Sorana D. Bolboacă. 2018. “Computation of Probability Associated with Anderson Statistic.” Mathematics 6(6):88. doi: 10.3390/math6060088.

Kane, Victor E. 1986. “Process Capability Indices.” Journal of Quality Technology 18(1):41–52. doi: 10.1080/00224065.1986.11978984.

Kassambara, Alboukadel. 2020. “Ggpubr: ’Ggplot2’ Based Publication Ready Plots.”

Laney, David B. 2002. “Improved Control Charts for Attributes.” Quality Engineering 14(4):531–37. doi: 10.1081/QEN-120003555.

Lavangnananda, K., and O. Tengsriprasert. 2002. “Classification of Time Series Data: A Synergistic Neural Networks Approach.” Pp. 179–83 in Proceedings of the 9th International Conference on Neural Information Processing, 2002. ICONIP ’02. Vol. 1. Singapore: Nanyang Technol. Univ.

Leavengood, Scott, and James E. Reeb. 1999. Statistical Process Control. Part 1: An Introduction. Oregon State University.

Leavengood, Scott, and James E. Reeb. 2015a. Statistical Process Control. Part 2: How and Why SPC Works. Oregon State University.

Leavengood, Scott, and James E. Reeb. 2015b. Statistical Process Control. Part 9: Process Capability Analysis. Oregon State University.

Lemon, J. 2006. “Plotrix: A Package in the Red Light District of R.”

Lightburn, K., and B. G Dale. 1992. “A CRITIQUE OF STATISTICAL PROCESS CONTROL IN A FIRST-LINE MOTOR INDUSTRY SUPPLIER.” Quality Engineering 4(3):371–81. doi: 10.1080/08982119208918919.

Luceño, Alberto. 1996. “A Process Capability Index with Reliable Confidence Intervals.” Communications in Statistics - Simulation and Computation 25(1):235–45. doi: 10.1080/03610919608813310.

Mainz, Jan, Toke Bek, Paul Bartels, Petter Rhode, Kjeld Møller Pedersen, and Vibeke Krøll. 2018. “Hvad Er Kvalitet Og Kvalitetsudvikling?” Pp. 19–33 in Kvalitetsudvikling i praksis. København: Munksgaard.

Marsaglia, George, and John Marsaglia. 2004. “Evaluating the Anderson-Darling Distribution.” Journal of Statistical Software 9(2). doi: 10.18637/jss.v009.i02.

McNeese, Bill. 2020. “What Do the Process Capability/Performance Metrics Measure?” BPI Consulting.

Mersmann, Olaf, Heike Trautmann, Detlef Steuer, and Björn Bornkamp. 2018. “Truncnorm: Truncated Normal Distribution.”

Microsoft. 2021. “Microsoft Excel for Microsoft 365.”

Mohammed, M. A., P. Worthington, and W. H. Woodall. 2008. “Plotting Basic Control Charts: Tutorial Notes for Healthcare Practitioners.” Quality and Safety in Health Care 17(2):137–45. doi: 10.1136/qshc.2004.012047.

Mohammed, Mohammed A., KK Cheng, Andrew Rouse, and Tom Marshall. 2001. “Bristol, Shipman, and Clinical Governance: Shewhart’s Forgotten Lessons.” The Lancet 357(9254):463–67. doi: 10.1016/S0140-6736(00)04019-8.

Mohammed, Mohammed, and Peter Worthington. 2012. “Why Traditional Statistical Process Control Charts for Attribute Data Should Be Viewed Alongside an Xmr-Chart.” BMJ Quality & Safety 22. doi: 10.1136/bmjqs-2012-001324.

Montgomery, Douglas C. 2020. Introduction to Statistical Process Quality Control. Eighth. New York: John Wiley & Sons.

Mun, Jonathan. 2008. “Understanding and Choosing the Right Probability Distributions.” Pp. 899–917 in Advanced analytical models: Over 800 models and 300 applications from the basel II accord to wall street and beyond. Hoboken, NJ, USA: John Wiley & Sons, Inc.

Nelson, Lloyd S. 1984. “The Shewhart Control Chart for Special Causes.” Journal of Quality Technology 16(4):237–39. doi: 10.1080/00224065.1984.11978921.

NHS. 2009. A Guide to Creating and Interpreting Run and Control Charts. Coventry: NHS Institute for Innovation and Improvement.

Nolan, Thomas W., and Lloyd P. Provost. 1990. “Understanding Variation.” Quality Progress (May):2–10.

Norge, Standard. 2000. “Kvalitetsledelse - ISO 9000.”

Ooms, Jeroen. 2021. “Writexl: Export Data Frames to Excel ’Xlsx’ Format.”

Pandey, Shanta, and Charlotte Lyn Bright. 2008. “What Are Degrees of Freedom?” Social Work Research 32(2):119–28.

Pearn, W. L., Samuel Kotz, and Norman L. Johnson. 1992. “Distributional and Inferential Properties of Process Capability Indices.” Journal of Quality Technology 24(4):216–31. doi: 10.1080/00224065.1992.11979403.

Perla, Rocco J., Lloyd P. Provost, and Sandy K. Murray. 2011. “The Run Chart: A Simple Analytical Tool for Learning from Variation in Healthcare Processes.” BMJ Quality & Safety 20(1):46–51. doi: 10.1136/bmjqs.2009.037895.

Plsek, Paul E. 23AD. “Tutorial: Introduction to Control Charts.” Quality Management in Health Care 1(1):65–74. doi: 10.1097/00019514-199223000-00010.

Prevette, Steven S. 2008. “Dr. Deming’s Funnel Experiment.” Symphony Technologies.

QIMacros. 2021. “Six Sigma & SPC Excel Add-in.”

R Core Team. 2021. “R: A Language and Environment for Statistical Computing.”

Reynolds, Maegan S., Sandra P. Spencer, Ashley Dunaway, Don Buckingham, and Thomas Bartman. 2021. “Scientific Approach to Assess If Change Led to Improvement for Statistical Process Control Analysis in Quality Improvement.” Journal of Emergency Nursing 47(1):198–205. doi: 10.1016/j.jen.2020.09.002.

Rowe, Harry B. 2012. “Understanding Stratification in Statistical Process Control.”

Rudis, Bob. 2020. “Hrbrthemes: Additional Themes, Theme Components and Utilities for ’Ggplot2’.”

Rungtusanatham, Manus. 2001. “Beyond Improved Quality: The Motivational Effects of Statistical Process Control.” Journal of Operations Management 19(6):653–73. doi: 10.1016/S0272-6963(01)00070-5.

Rungtusanatham, Manus, John C. Anderson, and Kevin J. Dooley. 1997. “Conceptualizing Organizational Implementation and Practice of Statistical Process Control.” Journal of Quality Management 2(1):113–37. doi: 10.1016/S1084-8568(97)90024-9.

Sachlas, Athanasios, Sotirios Bersimis, and Stelios Psarakis. 2019. “Risk-Adjusted Control Charts: Theory, Methods, and Applications in Health.” Statistics in Biosciences 11(3):630–58. doi: 10.1007/s12561-019-09257-z.

Scrucca, Luca, Greg Snow, and Peter Bloomfield. 2017. “Qcc: An R Package for Quality Control Charting and Statistical Process Control.”

Soage, José Carlos. 2020. “Poisson Distribution in R.” R Coder.

Sparks, Ross S., and John B. F. Field. 2000. “Using Deming’s Funnel Experiment to Demonstrate Effects of Violating Assumptions Underlying Shewhart’s Control Charts.” The American Statistician 54(4):291. doi: 10.2307/2685781.

SPC for Excel. 2006. “Over-Controlling a Process: The Funnel Experiment.”

SPC for Excel. 2021. “SPC for Excel.”

Stephens, M. A. 1974. “EDF Statistics for Goodness of Fit and Some Comparisons.” Journal of the American Statistical Association 69(347):730–37. doi: 10.1080/01621459.1974.10480196.

Stephens, M. A. 1976. “Asymptotic Results for Goodness-of-Fit Statistics with Unknown Parameters.” The Annals of Statistics 4(2):357–69.

Stephens, M. A. 1977. “Goodness of Fit for the Extreme Value Distribution.” Biometrika 64(3):583–88. doi: 10.1093/biomet/64.3.583.

Stephens, M. A. 1978. “Goodness of Fit with Special Reference to Tests for Exponentiality.” Technical Report No. 262.

Stephens, M. A. 1979. “Tests of Fit for the Logistic Distribution Based on the Empirical Distribution Function.” Biometrika 66(3):591–95. doi: 10.1093/biomet/66.3.591.

Stephens, M. A. 1979. “The Anderson-Darling Statistic.” in Technical report no. 39. Stanford: Stanford University.

Taboga, Marco. 2017. “Exponential Distribution.” in Lectures on probability theory and mathematical statistics. Kindle Direct Publishing.

Taguchi, G., E. A. Elsayed, and T. Hsiang. 1989. Quality Engineering in Production Systems. New York: McGraw Hill.

Tang, Loon Ching, and Su Ee Than. 1999. “Computing Process Capability Indices for Non-Normal Data: A Review and Comparative Study.” Quality and Reliability Engineering International 15(5):339–53. doi: 10.1002/(SICI)1099-1638(199909/10)15:5<339::AID-QRE259>3.0.CO;2-A.

Team, R. Studio. 2021. “RStudio: Integrated Development for R.”

Thor, J., J. Lundberg, J. Ask, J. Olsson, C. Carli, K. P. Harenstam, and M. Brommels. 2007. “Application of Statistical Process Control in Healthcare Improvement: Systematic Review.” Quality and Safety in Health Care 16(5):387–99. doi: 10.1136/qshc.2006.022194.

Trapletti, Adrian, and Kurt Hornik. 2021. “Tseries: Time Series Analysis and Computational Finance.”

Trist, E. L., and K. W. Bamforth. 1951. “Some Social and Psychological Consequences of the Longwall Method of Coal-Getting: An Examination of the Psychological Situation and Defences of a Work Group in Relation to the Social Structure and Technological Content of the Work System.” Human Relations 4(1):3–38. doi: 10.1177/001872675100400101.

Ugarte, Maria Dolores, Ana F. Militino, and Alan T. Arnholt. 2016. Probability and Statistics with R. Second. Boca Raton: CRC Press.

Walker, Helen M. 1940. “Degrees of Freedom.” Journal of Educational Psychology 31:253–69.

Wallander, Jan L., Margaret Schmitt, and Hans M. Koot. 2001. “Quality of Life Measurement in Children and Adolescents: Issues, Instruments, and Applications.” Journal of Clinical Psychology 57(4):571–85. doi: 10.1002/jclp.1029.

Western Electric Company. 1956. Statistical Quality Control Handbook. Indianapolis: Western Electric Company.

Wheeler, Donald J. 2013. “The Problem of Long-Term Capability.”

Wheeler, Donald J. 2021. “So You Want to Use a p-Chart? Not All Count-Based Data Will Qualify.” QualityDigest.

Wickham, Hadley. 2016. Ggplot2: Elegant Graphics for Data Analysis. Springer-Verlag New York.

Wickham, Hadley, Mara Averick, Jennifer Bryan, Winston Chang, Lucy D’Agostino McGowan, Romain François, Garrett Grolemund, Alex Hayes, Lionel Henry, Jim Hester, Max Kuhn, Thomas Lin Pedersen, Evan Miller, Stephan Milton Bache, Kirill Müller, Jeroen Ooms, David Robinson, Dana Paige Seidel, Vitalie Spinu, Kohske Takahashi, Davis Vaughan, Claus Wilke, Kara Woo, and Hiroaki Yutani. 2019. “Welcome to the Tidyverse.” Journal of Open Source Software 4(43):1686. doi: 10.21105/joss.01686.

Wickham, Hadley, and Jennifer Bryan. 2019. “Readxl: Read Excel Files.”

Wickham, Hadley, Romain François, Lionel Henry, and Kirill Müller. 2021. “Dplyr: A Grammar of Data Manipulation.”

Woodward, Jane. 1958. Management and Technology. London: HMSO.

Wu, Chien-Wei, W. L. Pearn, and Samuel Kotz. 2009. “An Overview of Theory and Practice on Process Capability Indices for Quality Assurance.” International Journal of Production Economics 117(2):338–59. doi: 10.1016/j.ijpe.2008.11.008.

Xie, Yihui. n.d. “Bookdown: Authoring Books and Technical Documents with R Markdown. R Package Version 0.24.”

Xie, Yihui, J. J. Allaire, and Grol. 2019. RMarkdown: The Definitive Guide. Boca Raton: CRC Press.

Zaiontz, Charles. 2020. “One-Sample Anderson-Darling Test.” Real Statistics Using Excel.

Zhu, Hao. 2021. “kableExtra: Construct Complex Table with ’Kable’ and Pipe Syntax.”